声测管主要由底管，中管以及接头管，防尘盖四部分组成的。中管是两端都开口的空心管，因此声测管不是太过于坚固。在一些的施工过程中，有不少的施工都会把声测管弄到变形或者损坏了声测管。无可奈何又要只能换置新一根声测管了，真是劳民伤财了。在施工的时候声测管是可以避免变形的，那我们施工人员应该如何避免声测管变形呢，下面就让我们一同探讨下吧。

    第一、 声测管在搬运的过程中，切记不可以野蛮粗暴的装卸；

    第二、吊装的时候注意其扭曲以及人为安装时应仔细注意其变形；

    第三、声测管在装卸过程中应该轻拿轻放，不可随便抛扔声测管；

    第四、打混凝土时导管垂直升降，避免左右摆动确保不直接撞击声测管管体；

    第五、安装声测管时，应保持声测管始终垂直。

    如果施工人员能够小心的处理声测管，做到上述的五个的注意方面，或许声测管就会减少变形的机会，也不用劳民伤财了，也能减少施工的成本和施工的时间了。

我公司专业生产销售声测管 本文由www.yxbohua.com提供 

In the bottom of the tube is mainly composed of tube, pipe and fitting, dust cover up of four parts. The pipe is open at both ends of the hollow tube, so the sound tube is not too strong. In some of the construction process, there are a lot of construction will make sound tube to deformation or damage to the tube. Helpless and can swap a new acoustic detecting tube, is costly. At the time of construction the deformation of tube can be avoided, that we should how to avoid the construction personnel sound tube deformation measurement, let's discuss together.
First, the sound tube in the process of handling, remember that you can't brutal handling;
Second, the lifting of time attention its distortion and artificial when installation should closely pay attention to the deformation;
Third, sound tube in the process of loading and unloading to should take put down gently, not casually thrown acoustic detecting tube;
Fourth, the concrete pipe while vertical, avoid swings around to ensure that the direct sound control body measurement;
Fifth, when installing acoustic detecting tube, should maintain sound tube is vertical.
If construction personnel can be careful acoustic detection tube processing, do the attention of the above five aspects, may sound tube can reduce the deformation of opportunity, also need not costly, can also reduce the construction cost and construction time.